Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: maaxtv Help

  1. #1
    Junior Member
    Join Date
    Aug 2014
    Posts
    5

    maaxtv Help

    If anyone need any help with the maaxtv device LN4000 or LN5000HD , please post here and I will try to help best I can.

  2. #2
    Junior Member
    Join Date
    Sep 2014
    Posts
    1
    My device won't boot. I see Maaxtv and spinwheel when i connect device to tv. All connections are good. I pressed reset buton while powering up machine and I get a menu. I tried all options to no avail. Please help

  3. #3
    Junior Member
    Join Date
    Aug 2014
    Posts
    5
    Try resetting your device by doing the following:

    To reset the maaxTV LN5000HD device, please do the following:

    1-Unplug the power from the back of the device.
    2-Using a paper clip or something similar, push and hold the reset button on the back of the device, (Don't push too hard the reset button will break).
    3-Plug the power back while still holding the reset button and wait until you see some small writing in the top left corner of the screen.
    4-Let go of the reset button.
    5-Scroll down to the line that says wipe data/factory reset and press OK.(Line 6)
    6-Scroll down where it says delete all user data and press OK and wait for it to finish.
    7- Press OK on reboot system now.

    The device will reboot and will be at factory condition. You will have to do the setup again and activate the device.

  4. #4
    Junior Member
    Join Date
    Oct 2014
    Posts
    1
    Hi,
    I have a problem with my Maaxtv LN4000 . Yesterday my wireless internet connectin got disconnected for about 5 seconds. After that my Maaxtv LN4000 stopped working. When I power on the Maaxtv it shows start and Setting. in the Setting everything is OK and the Wireless internet connection is 100%, but when i choose Start it shows only loading circle and nothing else. In the Setting there is a factory restore but when i press on it it says insert the code, Password??
    Help please and thanks a lot.

  5. #5
    Junior Member
    Join Date
    Aug 2014
    Posts
    5
    There is a problem on the servers that has been lingering for the last 2 days. They are working on it and should be resolved very soon. Try to reboot your system and see if it will load.

  6. #6
    Junior Member
    Join Date
    Nov 2014
    Posts
    1
    1.) I would like to reboot my maaxtv ln 5000 hd over the Menu and Settings, but it requiers a reboot code. And I don't know where to get that code.
    can you help me please?

    2.) Also to add Packages is needed a code. Where do I find/get that codes

  7. #7
    Junior Member
    Join Date
    Aug 2014
    Posts
    5
    The reboot function in the menu is disabled, you can reboot by press and hold the power button on the remote , then press ok on Power Off and go to OK and press OK.
    There are no packages to add, if there was a package available, you will be provided a code to add that package

  8. #8
    Junior Member
    Join Date
    Dec 2014
    Posts
    2
    Hi for all
    I have buy maaxtv ln3000 2013 and now not recog the server, and I like to jailbreak it with any firmware or instal android
    it's possible this or not
    best regards
    Ahmed

  9. #9
    Junior Member
    Join Date
    Jul 2016
    Posts
    1
    Hi All,
    ivé just switched on my maaxtv unit and it's asking for a renewal code, what is this and how do i find it??

  10. #10
    Junior Member
    Join Date
    Jan 2017
    Posts
    1
    if you want to watch top tv shows of the last decade, check this site http://livecustomwriting.com/blog/no...he-last-decade

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •